Basic Wood Router Guide For Beginners

If you are a wood worker or you need to work with wood then you might want to consider buying a router table or at least a wood router. It is near impossible to work with wood if you don’t own them. If you find that you really enjoy woodworking than you should consider purchasing a decent wood router.  You can also make a homemade router tables if you find a decent plan online.

You need to decide if you want one that you can fold in half. This will work well if you need to store it and don’t have much space. You can leave in a closet or any other area of your house. If you buy a permanent one then you must keep it in the space spot, but the upside is that they are very secure. If you use it a lot then you might want to go with this option.

When you decide to build a table then you will have to choose the right kind of wood. If you want a good table then choose really sturdy wood. You want to build something that will last forever. Usually you need to build the bottom of the table and then the rest of it. You want to make sure you do the legs very well so they won’t be wobbly. You will also want to sand all the surfaces so that everything is very smooth. You can use a planer to do this.

Using Wood Router For Small Projects

After you do the bottom you will do the sides and the back and lastly you will do the top. You should use plywood or hardwood and then put a laminate over it. If you use plywood make sure you get quality plywood. You want to use something like this because it is better and more durable than particleboard. Buy a ready-made table top if you want to save some time and make things easier. You can find one that has laminate on it, as well as channel guides and a miter gauge. Try to get a large one that is 24 x 32 inches. This will give you tons of space to work on.

You can buy a full table as well and then just put it together yourself. This can help you save time and money. Try to find one with extra features like vibrating leg levelers or a snap out center area to make it easy to work on. You can get a really great table that comes with a cabinet that will collect the dust. You can remove it by emptying the vented cabinet. This helps to keep your workspace clean and stops the motor from getting too hot. You might want to add extra features to your table such as a router fence vacuum. You can put this adapter on your fence and it will collect dust. You can keep your space very clean by getting rid of all chips and sawdust.

Basic Wood Router Guide

It is an important study of unpublished material on routers and routing. The router evaluations (24) are current and reflect the state of the art. A tool purchase based on the information available online should not be met with surprise. Few stones were left unturned. Expect the facts, but more importantly, expect the information (good and bad) left out of the advertising and owner’s manuals.

In my view, there are many great tools at great prices but the perfect router does not yet exist. The number one complaint, depth adjustment, has yet to be resolved. Many experiments with methods of depth control and target (final depth) are being tried but none of them compare well to machine tool precision, repeatability, or facility. Plunge tools are best at target depth. The fixed base tools are satisfactory at continuous adjustability but they are sloppy, fussy, present with backlash, and calibration cuts are still essential. The hot sales of router lifts supports my argument.

Ergonomics, component location and function, weight, material selection, electronics, motor locks, collets that don’t slip, and durability are all within practical limits. Router balance and control on the edge of stock or templet, facility with depth adjustment, and a router table router are still areas of neglect. Notwithstanding, do expect to find good plungers, a great little trimmer and lots of choices to meet your power and fixed base router needs in my directory or Great Routers. Moreover, anticipate some interesting stories on templates, drilling, collets, variable speed, routing aluminum, a 50-cent router table fence, and a few other topics.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>